Martec Replacement 1000W Heat Lamp to suit the Linear and Linear Mini Bathroom Heater 3-in-1 units (MRL1000W)

Original replacement heat lamp from Martec for the Martec units (not a generic copy). This is a replacement lamp used to change the heating globe in a Martec Linear bathroom unit. The lamp holder has two spring loaded clips on either end which can be (carefully) pushed in to release the globe on one end allowing it to be removed. To replace with a new lamp carefully push one of the globe ends into the spring loaded lamp holder and align the other side with the other end. The heat lamp should be securely held in place but should also be able to slightly rotate. Please make sure that the clear side of the lamp is facing downwards as this is where most of the heat comes out of. The white coated end is used to help deflect as much of the heat to go down on the other side.

This linear heat lamp measures 214mm x 10mm

Important: As with any such linear globes it is important not to touch it with your bare hands (as the oils from our hands can cause it to burn much faster). Please use clean gloves or a cloth/tissue when replacing the lamp.

This replacement heat lamp is compatible with the following Martec Linear models:

MBHL1000W

MBHL1000S

MBHL1000M

MBHM1000W

MBHM1000S

Please note that there are other model and brands that use a similar type heat lamp, we cannot guarantee for sure that this lamp will work with them as this was designed only for the Martec Linear units.