Martec Bathroom Heat, Light & Exhaust Fan LCD Remote Control & Receiver Kit

The Martec bathroom 3-in-1 fan, light and heat unit remote control provides easy operation with simpler installation. This unit provides easy access for all the necessary features of a Martec bathroom unit, fan, light and heat on/off and half heat (4 heat lamp units only). This RF remote works remotely meaning installation are easier when there isn't easy access to the wall cavities for the wall switch.

Martec bathroom 3-in-1 unit remote features and benefits:

• Product code: MBHREM
• Adapts to Martec bathroom 3-in-1 units (Exhaust Fan, Light, Heat)
• Compatible with the Contour 2, Contour 4, Profile Plus 2, Profile Plus 4, Linear Mini and Linear bathroom units
• Fan on/off
• Light on/off
• Heat on/off
• Heat half and half (Martec 4 heat lamp bathroom units only, turns on 2 heat lights at a time)
• All off button
• Wall mounting bracket included
• LCD display shows the functions being used
• 9 volt battery included
• Designed to take upto 1900W
• RF - Radio frequency
• Up to 30m operational range
• 4 Separate frequency switches if installing multiple units in the house
• 1 Year in home warranty
• Makes installation much easier and cheaper!
• N120

*IMPORTANT WARRANTY INFORMATION: This bathroom unit and remote must be installed by a licensed electrician!

Do not void your warranty, the Martec Martec Bathroom Heat, Light & Exhaust Fan LCD Remote Control & Receiver Kit is only warranted if installed with a compatible Martec 3-in-1 bathroom unit. Make sure to keep your purchase receipt, electrician’s receipt/invoice and electrician’s certificate of compliance in case you need to activate the warranty. The warranty on the Martec 3-in-1 bathroom heater units is is 3 years in home warranty (if all warranty criteria are met) and this remote kit is 1 year in home warranty. Unless specifically stated, this product cannot be used in locations where it will be exposed to splashes of water, or high levels/irregular humidity and moisture.

For technical assistance and questions, or if the installing electrician has difficulty during installation or finds a fault or a problem (before leaving the job site) please contact the Martec service line at 02 8778 7500. Full warranty information about procedures and what is covered can be found on the Martec website at https://www.martecaustralia.com.au/warranty-statement/ or by calling the Martec Warranty number 1300 730 064. The warranty can also be activated online by filling out the form on the Martec Bathroom Exhaust, Light And Heat LCD Remote Control Kit website under the “warranty” tab.

Product information is provided by the manufacturer/supplier/distributor of this product. While we do our best to keep it as accurate and up to date as possible some changes may occur without notice. This may include certain specifications upgrades or changes, design alternation and colour changes or variations. If you would like to confirm certain details of the product or would like some more information, please either contact the supplier's service line (especially for technical support or questions) or us on our contact page.